Removable signage that works on real working vehicles
Vehicle magnets are flexible magnetic panels printed with your business name, contact details, services and logo. They attach to a clean steel vehicle panel and can be removed when the vehicle is off duty, which makes them useful for businesses that share vehicles, lease vehicles, or need a sign that can come off before a weekend trip or a wash bay visit.
They are popular with electricians, plumbers, painters, garden services, courier drivers, mobile tyre fitters, pest control teams and small retailers doing local deliveries. For West Rand businesses, that flexibility matters when you are moving between Randfontein CBD, Krugersdorp, Westonaria, Mogale City and Roodepoort and you want the vehicle to do more than transport tools.
These signs are made for everyday use, not just show days. A well-made vehicle magnet should lie flat, hold firm at road speed, and still lift away cleanly when needed. If the panel is fitted correctly and the surface is cared for, it can give good service for many months, sometimes years depending on use and sun exposure.
Sizes, shapes and print choices for different vehicles
We produce vehicle magnets in common rectangular sizes, custom sizes and cut shapes where the vehicle panel allows it. The most requested options are 300 x 450 mm, 300 x 600 mm, 450 x 600 mm and 600 x 900 mm, but we can work to your vehicle panel size if you need something wider, shorter or narrower. For smaller cars, compact door magnets are often the better fit, while bakkies and vans can carry larger panels that are easier to read from the road.
For best visibility, keep the layout simple. A clear business name, main service and a phone number or web address usually gives better results than trying to fit too much in. Bold lettering helps at a distance, while high contrast colours improve legibility in bright Gauteng sun and against dusty roads. If your vehicle works in coastal humidity or on rough job sites, a cleaner layout also tends to age better because there are fewer fine details to lift or wear out.
- Standard rectangular magnets for doors and side panels
- Custom cut shapes for specific branding layouts
- Single side or pair sets for both doors
- Larger panels for bakkies, panel vans and service vehicles
Where vehicle magnets suit best
Vehicle magnets are a good fit where you need local visibility but do not want permanent vinyl on the bodywork. They work especially well for businesses with changing staff cars, temporary promotions, seasonal work or shared fleet vehicles. If you run a business from the Randfontein CBD or service nearby suburbs like Greenhills, Toekomsrus and Mohlakeng, a magnetic sign can help people identify your vehicle before you even stop.
They are also practical for businesses that do not want to commit to a full wrap while they are still growing. A contractor may start with two door magnets and add a larger rear panel later. A sales team may use them during the week and remove them for private use after hours. That kind of flexibility is useful when you are trying to keep overheads under control and still look organised on site.
- Contractors and repair teams
- Mobile beauty and wellness services
- Home service and maintenance businesses
- Delivery and courier vehicles
- Temporary campaigns, expos and promotions
Fitment, power needs and what the vehicle must have
There is no power or gas requirement for the magnet itself. It is a passive printed product that depends on a suitable vehicle surface and correct placement. The vehicle must have a steel panel for the magnet to hold to. It will not stick to plastic bumpers, fibreglass, aluminium or curved panels that are too tight. If your vehicle has body cladding or factory styling strips, the magnet may need to be sized around those sections.
Before ordering, check that the chosen panel is flat enough and wide enough for the message you want to display. A door panel is usually the safest choice, as long as it is clean and smooth. Avoid placing magnets over mouldings, rust spots, dents or heavy body filler. For vehicles that do long highway runs between Roodepoort and the West Rand towns, a properly fitted magnet is less likely to lift at the corners, which is where most problems start.
Fitment is simple. Place the magnet on a clean dry panel, press from the centre outward, and make sure the full sheet is in contact with the body. If you are putting it on for the first time, test the location before pressing hard. Once it is on, check that the edges sit flush all round. If there is a slight curve, the magnet can still work, but it should not be forced across a panel that is too rounded.
Care, cleaning and servicing for longer life
Vehicle magnets need basic care if you want them to last. Remove them regularly, especially after rain or washing, and wipe both the back of the magnet and the vehicle panel. Dust, moisture and grit can sit between the magnet and the paint, and over time that can mark the surface. This is one of those small things that gets ignored until the paint starts to show a line where the sign sat.
If your business works near construction sites, gravel roads or coastal areas, check the magnet more often. In dusty parts of the West Rand, fine grit can build up quickly and reduce the grip on the edges. In humid weather, keep the magnet dry before reapplying it. Store it flat when not in use and do not roll it up or fold it.
- Remove and clean weekly if the vehicle is used daily
- Wipe dry before putting the magnet back on
- Do not apply over wax, polish or dirt
- Store flat, away from heat and direct sunlight
- Check corners and edges for lifting after high speed travel
What to check before you place an order
When you order vehicle magnets, the most important thing is getting the size and message right for the vehicle and the job. Measure the available flat panel in millimetres, not by eye. If you can, send a photo of the door or side panel so the layout can be matched to the space. That helps avoid a design that looks good on paper but is too small once it is on the vehicle.
Think about what you want people to notice first. Some businesses want a large name and a service line. Others need a stronger focus on contact details or suburb coverage. If the vehicle is used by different staff members, keep the wording general enough that it still works when the person driving changes. For example, if the team covers Krugersdorp, Westonaria, Mogale City and Roodepoort, it can help to show the broader service area instead of only one town.
You should also check the vehicle colour, because light magnets on a white vehicle and dark magnets on a silver or blue vehicle behave differently visually. A high contrast layout usually reads best. If you already have brand artwork, send the correct version with the latest wording, because a magnet is only as good as the information on it and once it is printed, changes mean a reprint.
Ordering through our Randfontein print shop
@Print produces vehicle magnets for local businesses that need quick turnaround and practical print work. Our Randfontein CBD base supports West Rand clients who need signage that can be collected and put to work without delay, whether the job is for one vehicle or a small fleet. If you are adding magnets to a new service van or updating an older bakkie, we can help with layout, proofing and print ready setup.
We also handle related artwork work such as logo refreshes, proofing updates, artwork redraws and print ready artwork, which helps when a customer only has a low resolution file or an older sign that needs a cleaner finish. That way the final magnet is easier to read from a distance and better suited to day to day use around Randfontein and nearby areas.
To order, use the enquiry form on our contact page with your vehicle measurements, wording and any reference images. If you are unsure about the right size, include the make of vehicle and where you want the magnet placed. We will work from there and keep the process straightforward, because most customers just need a sign that fits, sticks properly and gets the job done.
Key facts
| Product type | Removable printed magnetic vehicle sign |
|---|---|
| Common sizes | 300 x 450 mm, 300 x 600 mm, 450 x 600 mm, 600 x 900 mm |
| Material | Flexible magnetic sheet with printed face |
| Best surface | Flat steel door or body panel |
| Use case | Temporary or removable branding for work vehicles |
| Power or gas needed | None required |
